X
Donghong Group Co., LTD
CN EN
Company News

Company News

Industry Updates

Industry Updates

Social Responsibility

Social Responsibility

2025.09.09

Warmly celebrate the successful launching of the "LH EVERBLOOM" 63,850 DWT bulk carrier

1.jpg

This vessel is designed and built as a single-propeller, single-engine ocean-going bulk carrier, meeting the relevant requirements of the "B-60" type ship defined by the International Load Line Convention (1966). It is suitable for carrying bulk/bagged grain, coal, iron ore, steel coils, and other dry cargo. It is the largest tonnage ship ever built in the history of Xiangshan, Zhejiang Province.

The ship is equipped with 5 cargo holds. The main hull girder consists of the main deck, hull plating, double bottom, top-side tanks, and bottom-side tank sloping plates, and is longitudinally framed. The top-side ballast water tanks and double-bottom ballast water tanks are connected through fore and aft passages. The vessel is designed for unlimited navigation areas.

2.jpg

Length overall: 199.85 m

Length between perpendiculars: 196.45 m

Breadth moulded: 32.26 m

Depth moulded: 18.90 m

Scantling draft: 13.50 m

Deadweight: ~63,700 t

Speed: 13.5 kn

Gross tonnage: 35,656

Net tonnage: 21,206

Main engine power:

1 set × 7,000 kW × 86.8 r/min

Main generator sets:

3 sets × 680 kW × 900 r/min

Shaft generator set:

1 set × 650 kW × 86.8 r/min

Emergency diesel generator set:

1 set × 120 kW × 1,800 r/min

3.png


< Prev
2024.10.04

Build the Lifeline Belt! Donghong Shipbuilding Holds Special Safety Belt Activity on "Safety Day"

> Next
2025.09.21

Warm congratulations on the successful launching of the first vessel in the 16,300 DWT asphalt carrier series, “ASPHALT SERENITY”

2024.12.23

[Good News] Another 500T Gantry Crane Successfully Installed

Following the commissioning of two 600-ton gantry cranes last year and the 700-ton and 500-ton gantr...

2024.12.18

[Good News] Complete Upgrade of CNC Equipment

After more than one month of installation and commissioning, the company's 7 sets of CNC cutting...

Donghong Group Co., LTD Follow Donghong

Copyright © 2025 Donghong Group Co., LTD All Rights Reserved.